Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $11.30200 - 40,000 kilogram
US $6.0040,001 - 999,999 kilogram
Paramtents
appearance transparent
hardness 30shoreA
mix ratio 1;1
viscosity 450000Mpa
tensil-strength 8
tear-strength 27
elongation 650%
density 1.08
sample available
technical support
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Injection molding silicone rubber Description:
Injection molding silicone rubber is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Injection molding silicone rubber Application:
Because of the outstanding properties,HY-2130 is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.
Injection molding silicone rubber Advantage:
1. Each worker has extensive experience and strong sense of responsibility.
2. Have established cooperative relations with many With a number adjacent to the
world's top 500 companies
3. Silicone Hydraulic Mould And Silicone Injection Mold All Can Customized By us.
4. Each of mold will choose best modeling methods according to your actual demand
5. Each mold will choose most suitable steel.
6. With Great parting line and short production cycle time
7. OEM and ODM silicone products are welcome.
8. One-stop service of product manufacturing, sample making, structural designing and
mold developing
Injection molding silicone rubber Typical Physical Properties:
Product | HY-2130 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 10:1 |
Viscocity Part A(mPa.s) | 60000±2000 |
Viscocity Part B(mPa.s) | 35000±500 |
Tensile strength (kgf/cm2) | 32±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
Injection molding silicone rubber Processing Recommendations:
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 10:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
Injection molding silicone rubber Shelf life:
8-10 months when stored under 24°C in original unopened packages.
Injection molding silicone rubber Package:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
Injection molding silicone rubber company image
Injection molding silicone rubber certification
Need any help on silicone rubber, please contact Ms omiga:
Tel:86-755-89948294
Mob:86-18938867575
E-mail: hyjw(at)szrl(dot)net
Skype:omigago
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.