Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $11.88200 - 40,000 kilogram
US $9.8840,001 - 999,999 kilogram
Paramtents
Color high translucent
silicone rubber:curing agent 1:1
Certification SGS,MSDS,RoHS
Material 100% silicone
Classification Chemical Auxiliary Agent
Chemical Auxiliary Agent Fluid
Appliacation injection moulding
Port Shenzhen
Sample Available
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Introduction of Injection molding silicone rubber:
Injection molding silicone rubber is a two-component liquid silicone rubber for injection molding processes. HY-923 shows a higher productivity, less yellowing and low volatile contents. HY-923 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Application of Injection molding silicone rubber:
Injection molding silicone rubber is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers,diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors so on.
Specification of Injection molding silicone rubber:
Vulcanisates consisting of HY-923 are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
Picture show of Injection molding silicone rubber:
Typical Physical Properties of Injection molding silicone rubber:
| Appearance | Viscosity (cP) | Density g/cm3 | Hardness(Shore A) | Elongation(%) | Tear Strength(kN/m | Curing condition | ||
HY-921 | Transparent | 400 | 1.07 | 30 | 400 | 25 | Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | ||
HY-922 | Transparent | 600 | 1.08 | 40 | 550 | 35 | |||
HY-923 | Transparent | 700 | 1.10 | 50 | 450 | 35 | |||
HY-924 | Transparent | 600 | 1.12 | 60 | 380 | 35 |
Processing Recommendations of Injection molding silicone rubber:
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 1:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
Shelf life of Injection molding silicone rubber,Liquid silicone rubber:
8-10 months when stored under 24°C in original unopened packages.
Package of Injection molding silicone rubber:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail
Certification of Injection molding silicone rubber:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
About us:
.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.