Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $14.80100 - 40,000 kilogram
US $9.8040,001 - 999,999 kilogram
Paramtents
color transparent
Certifications ROHS.MSDS.SGS ISO9001:2000
hardness 35 shore A
mix ratio 1:1
appreance liquid
sample available
shelf 8-10 months
package 20kg and 200kg per pail
application injection molding
operation heating
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Silicone Rubber for Injection Molding Description:
Silicone Rubber for Injection Molding is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
Silicone Rubber for Injection Molding Application:
Because of the outstanding properties,HY-2130 is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.
Silicone Rubber for Injection Molding Specification:
Vulcanisates consisting of HY-2130 are distinguished by the following properties:
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
Silicone Rubber for Injection Molding Picture Show:
Silicone Rubber for Injection Molding Typical Physical Properties:
Product | HY-2130 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 10:1 |
Viscocity Part A(mPa.s) | 60000±2000 |
Viscocity Part B(mPa.s) | 35000±500 |
Tensile strength (kgf/cm2) | 32±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Silicone Rubber for Injection Molding Processing Recommendations:
Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 10:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.
Silicone Rubber for Injection Molding Package:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
Silicone Rubber for Injection Molding Certification:
Any information of Liquid Silicon for Injection Molding , pls don't be hesitate to contact with Ms.Kaimi
Tel:0086-755-89212369
Mob:0086-18938867528
Fax:0086-755-89948030
E-mail: hyju(at)szrl(dot)net
Msn: hyjiangying(at)msn(dot)cn
Skype:hyjiangying
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.