Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.58100 - 40,000 kilogram
US $9.6940,001 - 999,999 kilogram
Paramtents
color translucent
Certifications ROHS.MSDS.SGS ISO9001:2000
hardness 40 shore A
mix ratio 1:1
appreance liquid
sample available
shelf 8-10 months
package 20kg and 200kg per pail
application silicone rubber for baby nipple
operation heating
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
silicone rubber for baby nipple appilication:
silicone rubber for baby nipple addition cure injection moulding silicone with high performance
and tear strength. It is mainly used for making silicone products,such as baby nipples, medical tube,key board etc.
silicone rubber for baby nipple typical properties:
High tear strength(≥25KN/m)
Good resilience
Anti-yellowing
Heat-ageing resistance
Good heat stability and weatherability ( temperature resistant range of -60°C--250°C)
Comply with USA CFR 21.Part.177.2600 and Chapter 4.9 Test Standards for Volatile Compound of EU RoHS Standard.
silicone rubber for baby nipple picture show:
silicone rubber for baby nipple datasheet:
Item | 921 | |
Appearance | Translucent | |
Viscosity (Pa.S) | 400 | |
Density (g/cm3) | 1.07 | |
Hardness (A°) | 55-60 | |
Elongation at break (%) | 400 | |
Tear strength (KN/m) | 25 | |
Curing condition | After Mixed A with B according to mixing ratio of 1:1, 150mm×150mm×2mm, mould will be formed in 7 minutes under temperature of 150°C |
silicone rubber for baby nipple introducstion:
Typical data can not be directly used for actual production guidance. Please contact us for details.
1.away from the fire ,avoid contact with sharp objests
2.Sterilize before using boiling water and store in a clean and safe place to mantain the health of your baby.
3.Check the bottle and the nipple frequently.Replace immediately if any crevice or scratch is detected.
silicone rubber for baby nipple package:
The general packages of HY-92XA/B series is in 20kg and 200kg per barrel.
silicone rubber for baby nipple certification:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
Any information of Liquid Silicon for Injection Molding ,pls don't be hesitate to contact with Ms.Kaimi
Tel:0086-755-89212369
Mob:0086-18938867528
Fax:0086-755-89948030
E-mail: hyju(at)szrl(dot)net
Msn: hyjiangying(at)msn(dot)cn
Skype:hyjiangying
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.