RTV Liquid Silicone Rubber for Injection Molding 2

FOB Price

US $14.90200 - 40,000 kilogram

US $8.1040,001 - 999,999 kilogram

group name: silicone rubber for textile coating& trademarks

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: HY-924

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 21:15:19 GMT

contact supplier

Paramtents

Place of Origin: Guangdong China (Mainland)
color: transparent silicon
mix ratio: 1:1
shelf: 8-10 months for the silicon
operation: heating the silicon
appreance: liquid silicon
sample: free silicon
application: injection molding
hardness: 40 shore A
Brand Name: HY silicone rubber

Packging & Delivery

Min Order200 kilogram

Briefing

High flowability
low viscosity
short injection time
aaLow volatiles content

Detailed

RTV-2 Liquid Silicone Rubber for Injection Molding

RTV-2 Liquid Silicone Rubber for Injection Molding is a two-component liquid silicone rubber for injection molding processes. HY-924 shows a higher productivity, less yellowing and low volatile contents. HY-924 would be possible to increase productivity by reduce injection time and total cycle time.

RTV-2 Liquid Silicone Rubber for Injection Molding Application:

Because of the outstanding properties,HY-924 is particularly suitable for the following elastomeric articles: sealing elements, O-rings, stoppers,diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.

RTV Liquid Silicone Rubber for Injection Molding 2

RTV-2 Liquid Silicone Rubber for Injection Molding Specification:

HY-924 :

·High flowability, low viscosity and short injection time.

·Low volatiles content; Fast cure

·High stability to ozone and ultraviolet light

· RTV Liquid Silicone Rubber for Injection Molding 2

Physical Properties

HY-924 Liquid Silicone for Injection Molding
		A Component	B Component
Appearance		transparent	transparent
Viscosity in Pa.s	DIN 53018	600	600
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm150mm2mm within 1mins under Temperature 150 centi degrees.
Density	DIN 53 479 A	g/cm3	1.08
Hardness	DIN 53 505	Shore A	40
Tensile strength	DIN 53 504 S2	N/mm2	6.5
Elongation at break	DIN 53 504 S2	%	550
Tear strength	ASTM D 624 die B	N/mm	35

PACKAGE:

RTV Liquid Silicone Rubber for Injection Molding 2

manufacturer image

certification

pls contact ms omiga

0086 755 18938867575

E-mail: hyjw(at)szrl(dot)net

Skype:omigago