Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $10.90200 - 40,000 kilogram
US $6.5040,001 - 999,999 kilogram
Paramtents
appearance transparent
hardness 30
mix ratio 1;1
viscosity 450000
tensile strength 8
tear strength 27
elongation 650
density 1.08
technical support
origin china
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
liquid silicone rubber for injection molding is a two-component liquid silicone rubber for injection molding processes. HY-924shows a higher productivity, high transparence, less yellowing and low volatile contents. HY-924 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
liquid silicone rubber for injection molding Application:
Because of the outstanding properties, HY-924 is particularly suitable for the following elastomeric articles: baby nipples, medical tubs, cake molds, food molds, sealing elements, O-rings, stoppers, diaphragms, keypads, bellows, vibration dampers, air vent flaps, switch covers, pressure cookers parts, cable connectors s.o.
liquid silicone rubber for injection molding Specification:
Vulcan sates consisting of HY-924are distinguished by the following properties:
·High productivity, high transparence
·High flowability, low viscosity and short injection time.
·Low volatiles content; Fast cure
·Excellent mold release, Excellent Thermal stability
·Excellent compression set; Excellent resilience
·High stability to ozone and ultraviolet light
·Outstanding resistance to ageing
·Not readily combustible, does not melt or drip
·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW
liquid silicone rubber for injection molding Typical Physical Properties
HY-924 liquid injection silicone rubber for injection mouldings | |||
|
| A Component | B Component |
Appearance |
| transparent | transparent |
Viscosity in Pa.s | DIN 53018 | 400 | 400 |
Pls mix part A and part B by mixing ratio 1:1. The mixture will get formed to be molds with size 150mm*150mm*2mm within 1mins under Temperature 150 centi degrees. | |||
Density | DIN 53 479 A | g/cm3 | 1.07 |
Hardness | DIN 53 505 | Shore A | 30 |
Tensile strength | DIN 53 504 S2 | N/mm2 | 6.5 |
Elongation at break | DIN 53 504 S2 | % | 400 |
Tear strength | ASTM D 624 die B | N/mm | 25 |
liquid silicone rubber for injection molding packing
liquid silicone rubber for injection molding company
liquid silicone rubber for injection molding certification
For more information about liquid silicone rubber, please feel free to contact with omiga
Mobile:86-18938867575
TEL: 86-0755-89948294
FAX: 86-0755-89948030
E-mail:hyjw(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.