Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
- Home
- About us
- Products
- RTV-2 silicone rubber for molds making
- Addition cure silicone rubber
- Life casting silicone rubber
- Liquid silicone rubber for insoles
- electronic potting silicone rubber
- injection moulding silicone rubber
- silicone foam
- Molding silicone rubber for tire molds
- Pad printing silicone rubber
- silicone rubber for textile coating& trademarks
- Other Silicone products
- Faqs
- News
- Certificate
- Contact us
3 silicone rubber for injection molding
- FOB Price
US $12.50200 - 40,000 kilogram
US $6.5040,001 - 999,999 kilogram
- group name
- silicone rubber for textile coating& trademarks
- Min Order
- 200 kilogram
- brand name
- Hong Ye silicone rubber
- model
- nz0130
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents
- update time
- Fri, 04 Jul 2014 17:18:51 GMT
Paramtents
appearance transparent
hardness 30
mix ratio 1;1
viscosity 450000
tensile strength 8
tear strength 27
elongation 650
density 1.08
technical support
origin china
Packging & Delivery
-
Min Order200 kilogram
Briefing
Favorable tension;
No deformation;
High temperature resistance.
Detailed
silicone rubber for injection molding Application:
1. Silicone Medical products
2. Silicone Food grade products
3. Silicone Baby product
4. Silicone Household product
5. Crafts and Gift product
6. Silicone Industries in all areas
silicone rubber for injection molding Feature:
silicone rubber for injection molding is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.
silicone rubber for injection molding Advantage:
- Relative low viscosity , not only can be pumped to mix, but also can be formed the continuous automation during the process of measurement, mixing, injection molding. as well as formed products with different complex shapes.
- Curing speed can be finished within 20~30mins and the molding cycle time is less than 1min, which is good for saving costs, efforts and be high efficiency.
- with low molding pressure, accurate measurement, high precision molds, products can be perfectly formed with no flash or defects, which helps to save cost on raw materials and post-working process.
- The performance of finished products can be compared favorably to HTV silicone rubber, while the labor costs can be saved by half.
- The vulcanizing system of this product is the same as other addition-cured silicone rubber, but there won’t be peroxide decomposition products which generated by HTV silicone cured. It is with high transparency, high tear strength, good elasticity, good weather-ability, and with resistance of high temperature, aging, as well as excellent resistance to yellowing.
silicone rubber for injection molding Picture Show:
silicone rubber for injection molding Typical Physical Properties:
Product | HY-2130 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 10:1 |
Viscocity Part A(mPa.s) | 60000±2000 |
Viscocity Part B(mPa.s) | 35000±500 |
Tensile strength (kgf/cm2) | 32±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 500±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
silione ruber for injection molding Processing Recommendations:
silicone rubber for injection molding is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about one year from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
silicone rubber for injection molding Shelf life:
8-10 months when stored under 24°C in original unopened packages.
silicone ruber for injection molding Package:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
silicone ruber for injection molding company
silicone ruber for injection molding certification
For more information about liquid silicone rubber, please feel free to contact with omiga
Mobile:86-18938867575
TEL: 86-0755-89948294
FAX: 86-0755-89948030
E-mail:hyjw(at)szrl(dot)net
Welcome to visit www (dot)szrl (dot)net anytime.