Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.88200 - 40,000 kilogram
US $10.2840,001 - 999,999 kilogram
Paramtents
MOQ 200kg
Payment T/T L/C Western union
Color Any color
Package 25kg/drum 200kg/drum
FOB Price US$7.98-15.3
Features Liquid
Port Shenzhen
Hs code 39100000
Certifications RoHS, MSDS, SGS, ISO9001:2000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
1. High-transparent liquid silicone for insoles Introduction:
HY- E620# addition molding silicone is generally named two-components silicone rubber, Part A is a flowable liquid, part B is the curing agent. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making masks, arms, legs, and other FDA molds application.
2. High-transparent liquid silicone for insoles Application:
HY- E620# addition molding silicone could be mainly used for making silicone insoles, concrete stones, precision molds, PU molds, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
3.Technique Data of High-transparent liquid silicone for insoles :
Model | HY-E620# |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 18-20 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 7000±3000 |
Tensile-strength( kgf /cm2 ) | >13 |
Tear-strength (kgf /cm2 ) | > 3 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
4.OPERRATING INSTRUCTION of High-transparent liquid silicone for insoles :
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE: Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
Any more information abt High-transparent liquid silicone for insoles mold making, pls feel free to contact Ms.Bella
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email: hysi(at)szrl(dot)net
Skype: bellajiaqi
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.