Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.58200 - 40,000 kilogram
US $9.9840,001 - 999,999 kilogram
Paramtents
Color Any color is available
Certififcate ISO9001,SGS
MOQ 200KG
Port shenzhen
HS Code 39100000
package 25kg/drum 200kg/drum
payment T/T L/C Western Union
sample free
mixing ratio 1:1 or 10:1
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
HY-E625 Liquid Silicone for Insoles is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the E625# A and E625#B at a mix ratio of 1:1 the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for insoles.
Application:
HY-E625 silicone rubber is specially developed for insoles. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
Specification:
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
Typical Physical Properties
Product | E-625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Mixed Viscocity(mPa.s) | 8000±2000 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and viscosity of E625 according to their special requirements.)
Notice :
As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won’t be cured :
1. Liquid condensation silicone ( condensation silicone not completely cured or organic
tin compounds )
2 .Sulphur, sulfide and sulfur rubber materials.
3. Amine compounds as well as contains the amine materials.
4 .Pewter solder flux.
Any more information, pls feel free to contact Ms.Bella
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email:hysi(at)szrl(dot)net
Skype: bellajiaqi
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.