Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.70200 - 40,000 kilogram
US $12.5040,001 - 999,999 kilogram
Paramtents
Color Any color is available
Certififcate ISO9001,SGS
MOQ 200KG
Port shenzhen
HS Code 39100000
package 25kg/drum 200kg/drum
payment T/T L/C Western Union
mixing ratio 1: 1
Features liquid
sample free
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
addition cured silicone rubber for silicone insoles
Description of addition cured silicone rubber for silicone insoles
HY-E625 Liquid Silicone for Insoles is a solvent-free, flowable 2 Component RTV Silicone rubber.
After mixing the E625# A and E625# B at a mix ratio of 1:1 the material will cure by an addition reaction
at room temperature. The cure rate can be accelerated
significantly by heat. Material has been especially developed for insoles.
Application of addition cured silicone rubber for silicone insoles
HY-E625 silicone rubber is specially developed for insoles.
It can also be used for lace coating and conveyer belt coating and also for other applications
where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
Specification of addition cured silicone rubber for silicone insoles
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
Typical Physical Properties of addition cured silicone rubber for silicone insoles
Product | E625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Mixed Viscocity(mPa.s) | 8000±2000 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and
viscosity of E625 according to their special requirements.)
Using instructions for addition cured silicone rubber for silicone insoles :
1. Applicable to the injection molding process
2. Mixing component A with B evenly according its mix ratio, it is ready for use after degassing,
it cures by heating up the temperature when pouring into the mold.
3. The curing time is subject to the temperature, short time will be required under high
temperature, long time will be required while the product with large thickness.
Any more information abt addition cured silicone rubber for silicone insoles, pls feel free to contact Ms. Bella
Mobile: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Website: www (dot) szrl (dot) net
Email:hysi(at)szrl(dot)net
Skype: bellajiaqi
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.