Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $15.88200 - 40,000 kilogram
US $10.2840,001 - 999,999 kilogram
Paramtents
color white/off white
Brand Hong Ye silicone rubber
HS Code 39100000
package 25kg/drum 200kg/drum
MOQ 200kg
Payment T/T L/C Western union
Certifications RoHS, MSDS, SGS, ISO9001:2000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Addition cure liquid silicone rubber for silicone insoles is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the E625# A and E625#B at a mix ratio of 1:1 the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for insoles.
Addition cure liquid silicone rubber for silicone insoles Application:
Addition cure liquid silicone rubber for silicone insoles is specially developed for insoles. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
Addition cure liquid silicone rubber for silicone insoles Specification:
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
Addition cure liquid silicone rubber for silicone insoles Typical Physical Properties
Product | E-625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Mixed Viscocity(mPa.s) | 8000±2000 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and viscosity of E625 according to their special requirements.)
Addition cure liquid silicone rubber for silicone insoles Using instructions:
1. Applicable to the injection molding process
2. Mixing component A with B evenly according its mix ratio, it is ready for use after degassing, it cures by heating up the temperature when pouring into the mold.
3. The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.
Any more information abt Addition cure liquid silicone rubber for silicone insoles , pls feel free to contact Ms.Bella
Mob: 0086-18938867572
Tel: 0086-755-89948006
Fax: 0086-755-89948030
Email: hysi (at) szrl (dot) net
Skype: bellajiaqi
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.