Injection molding rubber silicone for candy crystals

FOB Price

US $9.98200 - 40,000 kilogram

US $7.3540,001 - 999,999 kilogram

group name: injection moulding silicone rubber

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: E-635# Silicone Rubber,E-635 silicone rubber for m

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 21:33:50 GMT

contact supplier

Paramtents

Certification SGS,MSDS,RoHS
HARDNESS 35+/-5
Mixing Ratio 1:1
Type silicone rubber for mold making
Appearance Fluid
Certificated RoHS, Reach, MSDS,SGS.ISO9001:2008
EINECS No 39100000
Purity 100%

Packging & Delivery

Min Order200 kilogram

Briefing

Low visocisty(5000cs) ---Easy for pouring operation
High tensile strength --high copy times
Low shrinkage
mixing ratio 1

Detailed

Injection molding rubber silicone for candy crystals

Injection molding rubber silicone for candy crystals is a two-component liquid silicone rubber for injection molding processes. HY-2130 shows a higher productivity, less yellowing and low volatile contents. HY-2130 would be possible to increase productivity by reduce injection time and total cycle time. Also, it is easier to inject into the cavity of the mold which is more complicated designed. In addition, higher transparency and less volatile content make it most suitable for consumer products.

Injection molding rubber silicone for candy crystals Application:

Because of the outstanding properties,HY-2130 is particularly suitable for the following elastomeric articles: resin beads, pendants, candy crystal, ice resin, jewelry, resin bangle bracelet, rock candy,. etc.

Injection molding rubber silicone for candy crystals Specification:

Vulcanisates consisting of HY-2130 are distinguished by the following properties:

·High flowability, low viscosity and short injection time.

·Low volatiles content; Fast cure

·Excellent mold release, Excellent Thermal stability

·Excellent compression set; Excellent resilience

·High stability to ozone and ultraviolet light

·Outstanding resistance to ageing

·Not readily combustible, does not melt or drip

·Easy-pigmentable with LSR Colour Pastes fulfill the requirement of KTW

Typical Physical Properties

Product	HY-2130
Appearance	Translucent
Hardness(shore A)	25±2
Mix ratio(A:B)	10:1
Viscocity Part A(mPa.s)	60000±2000
Viscocity Part B(mPa.s)	35000±500
Tensile strength (kgf/cm²)	32±5
Tear-strength (kN/m)	18±2
Elongation(%)	500±50
Pot life/working time (mins)	30-40
Curing time/setting time (hrs)	3-4hrs(25°C) 110-20mins(60°C)
Shrinkage rate (%)	0.1

Processing Recommendations

Ready-to-use mixtures (of the components A and B) are fed directly to the injectionmoulding machine from the original containers by means of a metering and mixing unit. The mixture, consisting of the two components in the ratio 10:1, is injected into the heated mould. Because of low viscosity, the injection daospeed and injection pressure need to be carefully adjusted so that the injection time can be decreased. At mould temperatures of 170 - 230°C, the addition -crosslinking silicone rubber vulcanises free of dissociation products within a few seconds. Excellent flowability and easy demoulding permit fully automated production of large numbers of articles in shorter total cycle times.

SHELF LIFE:

8-10 months when stored under 24°C in original unopened packages.

PACKAGE:

Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.

Any questions of Injection molding rubber silicone for candy crystals, please feel free to

contact Aaron:

TEL: 086-755-89948006

FAX: 086-755-89948030

MOBILE:086-18938867535

PIcture Showroom

Injection molding rubber silicone for candy crystals