Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $18.60200 - 40,000 kilogram
US $9.8040,001 - 999,999 kilogram
Paramtents
color as request
catalyst free charge
sample available
mix ratio 1:1
hardness 20 shore A
shelf 10 months
package 20kg and 200kg per drum
Certification ROHS.MSDS.SGS ISO9001:2000
operation pouring and brushing
MOQ 200kgs
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Produce liquid silicone rubber for insoles making
Description:
Liquid silicone rubber for insole making is a kind of addition cure silicone rubber. It is primarily intended for silicone insole as a kind of foot care silicone rubber. With two component silicone rubber part A and part B, mixing ratio is 1:1. Generally the color is translucent or transparent.
Specifications:
Technique Data:
Model | HY-E620 |
Appearance | Translucent |
Mixing Ratio | 1:1 |
Operating time (Mins 25°C) | 10-15 |
Curing time (Mins 25°C) | 30-50 |
Hardness (A°) | 18-20 |
Density ( g/cm 3 ) | 1.0 |
Viscosity (CS) | 7000±3000 |
Tensile-strength( kgf /cm2 ) | >13 |
Tear-strength (kgf /cm2 ) | > 3 |
Elongation-break(%) | >450 |
Retractility(%) | ≤0.1 |
Operation:
1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
Storage :
Liquid silicone rubber for insole making is an environmentally-friendly liquid silicone product, is not easy to burn and can be stored and transported as non-hazardous goods. The shelf life of the product is about 12 months from the date of production. Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package :
5kg/drum, 20kg/drum and 200kg/drum
Shelf-life :
Ten (10) months under room temperature 25 Celsius.
Company Profile
We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers,
special silicon for manual molding, shoe mold rubber, pad printing silicone, encapsulants and potting compound,
addition cure liquid silicone,baby nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber,
HTV silicone rubber, lead-zinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber,
RTV-2 silicone rubber, silicone molds, silicone products,etc.
silicone rubber package details
silicone rubber certifications:
SGS
ROSHS
FDA
ISO900
We can provide good solution for you , if you have question about how to make silicone mold , or how to use the silicone mold ,and any problem about the silicone mold , pls kindly feel free to let us know , we will be happy to serve you.
Any questions of liquid silicone rubber for insoles making, please feel free to contact Kaimi:
MOBILE:0086-18938867528
E-MAIL: hyju(at)szrl(dot)net
skype:hyjiangying
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.