medical grade soft silicone for high-heel shoe pad

FOB Price

US $15.28200 - 40,000 kilogram

US $8.8840,001 - 999,999 kilogram

group name: Liquid silicone rubber for insoles

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: E620# high heel silicon

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Fri, 08 Nov 2013 21:35:21 GMT

contact supplier

Paramtents

Color Any color is available
Certificate ISO9001,SGS,REACH
application for silicone shoes pad, insoles
Elongation-break(%) 420 ± 50
MOQ 200kg
hardness (A°) 20±2
Features Liquid
Mixing Ratio 1:1
Hs code 39100000
Density ( g/cm 3 ) 24 ± 2

Packging & Delivery

Min Order200 kilogram

Briefing

1.100% medical grade silicone
Endurable and won't get deformed.
Easy cleaning. Does not absorb odors.

Detailed

Silicone high-heel shoe pad

Silicone high-heel shoe pad application

Silicone is good for high heel, silicone insoles, pads, keen pads etc.

Silicone high-heel shoe pad advantage

1. 100% medical grade silicone. Non-toxic.

2. Silicone distributes load more evenly. Shock absorption and pain relief.

3. Silicone grantees superior comfort and long lasting effectiveness.

4. With minimal toe depth in the front to make your feet comfortable.

5. Multi-purpose. Fit all kinds of shoes, including ladies shoes, running shoes and football boots.

6. Easy use. Can be changed from a shoe to another one easily.

7. Endurable and won't get deformed.

8. Easy cleaning. Does not absorb odors.

9. Both OEM and ODM service.

medical grade soft silicone for high-heel shoe pad

Silicone high-heel shoe pad data sheet

Model	HY-E20#	HY-E10#
Appearance	Translucent/ Skin	Translucent/Skin
Mixing Ratio	1:1	1:1
Operating time (Mins 25°C)	20-30	10-15
Curing time (Mins 25°C)	60-90	60-90
Curing time (Mins 60°C)	10-15	20 - 30
Hardness (A°)	20±2	10±2
Density ( g/cm 3 )	1.08	1.08
Viscosity (CS) (Part A)	6000-8000	30000 ± 5000
Viscosity (CS) (Part B)	6000-8000	5000 ± 500
Viscosity (CS) (After mixed)	6000 ± 1000	10000 ± 1000
Tensile-strength( kgf /cm2 )	75 ± 20	35 ± 20
Tear-strength (kgf /cm2 )	24 ± 2	10 ± 2
Elongation-break(%)	420 ± 50	450 ± 50
Retractility(%)	≤0.1	≤0.1

Instructions of silicone high-heel shoe pad

1. Stir part A and part B with right mixing ratio evenly. And get the mixture for vacuum-pumping. (If there is no vacuumizer, you can just pour the mixture slowly from the corner so that less bubbles caused)

2. Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4. Pour the mixture with correct mixing ratio into the model frame. After about 2~4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold.

Any more information silicone high-heel shoe pad, pls feel free to contact Ms. Bella:

Mobile: 0086-18938867572

Tel: 0086-755-89948006

Fax: 0086-755-89948030

Website: www (dot) szrl (dot) net

Email: hysi(at)szrl(dot)net

Skeype: bellajiaqi