Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $16.388,000 - 40,000 kilogram
US $9.9840,001 - 999,999 kilogram
Paramtents
Color Translucent
Certificate MSDS, SGS, RoHS, Reach , ISO9001:2000
Application For molds making
Packing Vacuum Pumping
Shelf Life 12 months
Shape Liquid
delivery within 3 days after payment
payment terms T/T, L/C
MOQ 200 kg
transportation by sea, by air
Packging & Delivery
Min Order8000 kilogram
Briefing
Detailed
HY-E625 Liquid Silicone rubber for Insoles molding
HY-E625 Liquid Silicone rubber for Insoles molding is a solvent-free, flowable - 2 Component RTV Silicone rubber. After mixing the E625# A and E625#B at a mix ratio of 1:1 the material will cure by an addition reaction at room temperature. The cure rate can be accelerated significantly by heat. Material has been especially developed for insoles.
Application of HY-E625 Liquid Silicone rubber for Insoles molding:
HY-E625 silicone rubber is specially developed for insoles. It can also be used for lace coating and conveyer belt coating and also for other applications where fast cure at elevated temperatures and good flow or self leveling characteristics are required.
Specification of HY-E625 Liquid Silicone rubber for Insoles molding:
·Convenient 1:1 mixing
·Free of solvents
·Pourable
·Good self leveling characteristics
·No release products
·Fast cure at elevated temperatures
Typical Physical Properties
Product | E-625 |
Appearance | Translucent |
Hardness(shore A) | 25±2 |
Mix ratio(A:B) | 1:1 |
Mixed Viscocity(mPa.s) | 8000±2000 |
Tensile strength (kgf/cm2) | 45±5 |
Tear-strength (kN/m) | 20±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | 0.1 |
(Note: Other hardness is adjustable,customers can use silicone oil to lower the hardness and viscosity of E625 according to their special requirements.)
Using instructions:
1 Applicable to the injection molding process
2 Mixing component A with B evenly according its mix ratio, it is ready for use after degassing, it cures by heating up the temperature when pouring into the mold.
3 The curing time is subject to the temperature, short time will be required under high temperature, long time will be required while the product with large thickness.
SHELF LIFE:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE:
Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
More information about the HY-E625 Liquid Silicone rubber for Insoles molding, please don't hesitate to contact with Miss Caroline at any time !
Tel: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.