Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $17.821,000 - 40,000 kilogram
US $12.8040,001 - 999,999 kilogram
Paramtents
Color Transparent
Certificate MSDS , SGS, RoHS , Reach , ISO
Mix Ration 1: 1
Operation By Machine
Cure time Few seconds at temperature of 150C
Package 25kgs or 200kgs
Shelf Life 12 months
Viscosity 60000-80000CPS
Payment within 3 days after payment confirmed in our bank
Delivery within 3 days after payment confirmed in our bank
Packging & Delivery
Min Order1000 kilogram
Briefing
Detailed
mesh printing silicon rubber
Application of mesh printing silicon rubber:
It is specially used for skid-proof purpose of frilals, underclothes and widely applied for cotton fabric, polyester-mixed cotton cloth, nylon cloth, flax, woolen, insulating cloth, etc.
Specification of mesh printing silicon rubber:
-Low shrinkage(<0.1%)
-Good skid-proof effect and high adhesive strength
-Wearproof, wash-resistant, high temperature resistant
-Non-toxic and odorless, food grade silicone
-High transparency and good tear-strength.
mesh printing silicon rubber is a 2-part liquid silicone with high transparency, great tear-strength and strong bonding force. This product portfolio is
complemented by water-based finished silicone rubber dispersions and a large number of special additives for customizing our standard grades. Textile coaters will thus find the perfect solution for every application at HY SILICONES.
Datasheet of mesh printing silicon rubber:
Model | TB0315 |
Appearance | Transparent |
Hardness(shore A) | 15±2 |
Mix ratio(A:B) | 1:1 |
Viscosity(mPa.s) | 60000~100000 |
Tensile strength(Mpa) | 4.6 |
Tear-strength(KN/m) | 19±2 |
Elongation(%) | 360 |
Pot life/working time(25°C) | 12-24 hours |
curing time(100-120°C) | 10~20(mins) |
Operation introduction of mesh printing silicon rubber:
1,Mix Part A and Part B as ratio 1:1, you may add additive such as pigment as ratio 1~2% into part A.
2,It can be cured by heating with 100~190 degree, the curing time will be 5~10 minutes.
SHELF LIFE of mesh printing silicon rubber:
8-10 months when stored under 24°C in original unopened packages.
PACKAGE of mesh printing silicon rubber:
If ratio is 1:1 :Packed in 20kg/pail + 20kg/pail and 200kg/pail + 200kg/pail.
If ratio is 10:1 :Packed in 20kg/pail + 2kg/pail and 200kg/pail + 20kg/pail.
For more information about the mesh printing silicon rubber, please don't heistate to contact with Miss Caroline at any time
TEL: +86-755-89948019
Mobile: +86-18938867567
Skype: cathy19900719
Email: hysf(at)szrl(dot)net
Website : www(dot)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.