Liquid RTV Silicone Rubber for Printing pads

Features of Liquid RTV Silicone Rubber for Printing pads :

1) High reprint times.2) resonable price.3)all kind of color 4)Curing agent for free 5)Permanent and durable.

Application of Liquid RTV Silicone Rubber for Printing pads :

silicone rubber  is specially designed for silicon pads which requires to be  exquisite, without impurity or granules, and has advantages such as wearability, high-temperature resistance, and good in printing effect due to adding American Dupont Teflon high-temperature resistance new material. Applications: It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks. Silicon pad is a carrier  which transfer printing the patterns on the steel plate onto the toy products' surface.

Datasheet of RTV silicone rubber for silicon prints pad

Model:  900# Liquid RTV Silicone Rubber for Printing pads

Appearance: yellow

Viscosity (cs): 15000-18000

Hardness (A): 28-30

Tensile strength (kgf /cm) ≥35

Elongation break: (%)≥400

Retractility (%): ≤0.3

Curing agent mixed rate (%): 2-3

Operate time (min): 30

Curing time (hours): 2-4

Model:  911# Liquid RTV Silicone Rubber for Printing pads

Appearance: yellow, red, green, white

Viscosity(cs): 15000-18000

Hardness(A): 28-30

Tensile strength (kgf/cm) ≥35

Elongation break: (%)≥400

Retractility (%): ≤0.3

Curing agent mixed rate(%): 2-3

Operate time(min): 30

Curing time(hours): 2-4

Model:  912# Liquid RTV Silicone Rubber for Printing pads

Appearance: red, green

Viscosity(cs): 15000-18000

Hardness(A): 28-30

Tensile strength (kgf/cm) ≥35

Elongation break: (%)≥400

Retractility (%): ≤0.3

Curing agent mixed rate(%): 2-3

Operate time(min): 30

Curing time(hours): 2-4

Model:  918# Liquid RTV Silicone Rubber for Printing pads

Appearance:yellow, red, green, white

Viscosity(cs): 15000-18000

Hardness(A): 28-30

Tensile strength (kgf/cm) ≥40

Elongation break: (%)≥500

Retractility (%): ≤0.3

Curing agent mixed rate(%): 2-3

Operate time(min): 30

Curing time(hours): 2-4

Model:2018# Liquid RTV Silicone Rubber for Printing pads

Appearance: yellow, red, green, white

Viscosity (cs): 20000

Hardness (A): 23

Tensile strength (kgf /cm) ≥30

Elongation break: (%)≥350

Retractility (%): ≤0.3

Curing agent mixed rate (%): 2-3

Operate time(min): 30

Curing time (hours): 2-4

Any demands for Liquid RTV Silicone Rubber for Printing pads , pls contactMs Taylor:

Tel: +86-0755-89948006

Mob: +86-18938867522

Skype: taylordl828