Pad printing silicone for pringting pictures on ball surface

FOB Price

US $14.78200 - 40,000 kilogram

US $13.3540,001 - 999,999 kilogram

group name: Pad printing silicone rubber

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: HY 916

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Sat, 09 Nov 2013 11:36:16 GMT

contact supplier

Paramtents

Color half transparence
Hardness 18~22Shore A
Proportion of picture and pad 1:3
Certifications ISO,RoHS,SGS,FDA
Sample Avaliable

Packging & Delivery

Min Order200 kilogram

Briefing

1.Abrasion resistence
2.high temperature resistence
3.Exquisite quality
4. Excellent resiliency
5.Good printing effect

Detailed

1. Pad printing silicone rubber 916# datasheet:

Model	Appearance	Viscosity (cps)	Hardness (A^o)	Tensile Strength (Mpa)	Tear Strength (KN/m)	Elongation (%)	Mixing Ratio(%)
916	red / yellow / green / white	29000~35000	20±2	≥3.5	≥2.4	≥420	2~3

2. Pad printing silicone rubber application:

- Pad printing is primarily used for non-uniform, multidimensional products like a golf ball. Flat surfaces can be pad printed as well.
- Typical image sizes are less than 3" in diameter, but print sizes of 5" or larger can be achieved in special occasions.
- You can pad print a very wide range of substrates, including plastics, metals, glass, ceramic, vinyl, rubber, polypropylene, leather, acrylic, cotton, even food items and more. A pad printer is NOT a documentation printer but it can be used for printing on paper products, for instance paper cubes or napkins.

3.Pad printing operation silicone rubber instructions

Pad printing silicone rubber is two-component silicone, part A is the liquid silicone rubber, part B is the catalyst. The usual mxing ratio for silicone rubber and catalyst is 100 : 2-3, eg. we take 100grams of liquid silicone rubber, then we add 2-3 grams catalyst, mix then evenly and pour it to your mold. Then after 2-4 hours, you will obtain a printing pad.

4.Frequently asked question of pad printing silicone rubber:

Why the printed pattern is incomplete or not clear?

--If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.

---If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.

Any questions,please feel free to contact Ms. Moe:

TEL: 086-18938867514

FAX: 086-755-89948030