Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $6.60100 - 40,000 kilogram
US $5.9040,001 - 999,999 kilogram
Paramtents
good elasticity,good printing no impurites,good elasticity,good printing
colur red,green,yellow
certificates RoHS. MSDS.SGS ISO9001:2000
mix 1:1 or 10:1
promotion over 500KG 2% discount
environmental protection yes
material liquid silicone with two part
usage fine quality pad printing silicon rubber
samples available
Delivery Time within 3 days after payment confirmed in our bank.
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
Fine quality pad printing silicon rubber
1. Datasheet of Pad Printing Silicon Rubber:
Special silicon products for pad printing | ||||||
Model
| 901# | 902# | 912# | 916# | 918# |
|
Appearance
| Red white Yellow green | Red white Yellow green | Red white Yellow green | Red white Yellow green | Red white Yellow green |
|
Mixing proportion Of curing agent | 2-3% | 2-3% | 2-3% | 2-3% | 2-3% |
|
Operating time (hours) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
|
Curing time (hours) | 3-4 | 3-4 | 3-4 | 3-4 | 3-4 |
|
Hardness (A°) | 20-25 | 26-30 | 26-30 | 20-22 | 26-30 |
|
Viscosity (cs) | 29000-34000 | 29000-34000 | 29000-35000 | 29000-35000 | 28000-34000 |
|
Tensile-strength ( kgf /cm) | ≥30 | ≥32 | ≥35 | ≥35 | ≥36 |
|
Tear-strength ( kgf /cm) | ≥18 | ≥22 | ≥24 | ≥24 | ≥26 |
|
Elongation-break ( % ) | ≥360 | ≥380 | ≥410 | ≥420 | ≥420 |
|
Retractility (%) | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 | ≤0.3 |
|
Usage
| Pad printing only | Pad printing only | Pad printing only | Pad printing only | Pad printing only |
|
Package
| 20kg/drum and 200kg/drum |
2.Features of Pad Printing Silicon Rubber:
Pad printing silicon rubber has the advantage of good printing effects, fine quality,favorible resilience, high print times and without any impurity.
Frequently asked questions about pad printing silicon rubber:
Why the printed pattern is incomplete or not clear
If the silicon pad is too hard while the pattern is very delicate or small, the printing patterns will be incomplete or not very clear, for in that way the silicon pad could not adsorb the printing ink from the steel plate well. If your pattern is very delicate or small, please use soft silicon pad for pad printing.
If the percentage of water in the ink is very high, the printing pattern also will be incomplete, and spot may appeared. For this situation, please clean your ink box, or change the printing ink or Tianna water.
Why the silicon pad did not absorb the ink
Any silicon pad or liquid silicon rubber could absorb ink well. If large patterns or big letters need to print, the printing pad will for sure absorb ink well. For small letters, please do not use hard silicon pad, as it could not absorb the printing ink thoroughly from the steel plate.
Why the silicon pad can not transfer the printing pattern well
It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for each one dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.
For more information, please feel free to contact with Mr Wenson:
TEL: 0086-755-89948019
FAX: 0086-755-89948030
MOBILE: 0086-18938867531
skype: wensona
E-mail:hyb(at)szrl(dot)net
website:www(dot)szrl(dot)net
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.