Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
- Home
- About us
- Products
- RTV-2 silicone rubber for molds making
- Addition cure silicone rubber
- Life casting silicone rubber
- Liquid silicone rubber for insoles
- electronic potting silicone rubber
- injection moulding silicone rubber
- silicone foam
- Molding silicone rubber for tire molds
- Pad printing silicone rubber
- silicone rubber for textile coating& trademarks
- Other Silicone products
- Faqs
- News
- Certificate
- Contact us
RTV pad printing silicone rubber for transfer pad manufacturer-similar with Wacker
- FOB Price
US $11.80200 - 40,000 kilogram
US $9.8840,001 - 999,999 kilogram
- group name
- Pad printing silicone rubber
- Min Order
- 200 kilogram
- brand name
- Hong Ye silicone rubber
- model
- HY-916
- Nearest port for product export
- Shenzhen, Guangzhou, Xiamen, Shanghai
- Delivery clauses under the trade mode
- FOB, CFR, CIF
- Acceptable payment methods
- T/T, L/C, Westem Union
- Export mode
- Export through agents
- update time
- Sat, 09 Nov 2013 11:59:32 GMT
Paramtents
component A white
component B red
Curing Agent 5%for free charged
Certification SGS,MSDS,RoHS
Material pad printing silicone
Classification Chemical Auxiliary Agent
Appearance Fluid
Application making silicone pad
Port shenzhen
Packging & Delivery
-
Min Order200 kilogram
Briefing
1.Advantage of good printing effects
2.Fine quality
3.Good resilience
4.Without and impurity
Detailed
Application of Pad Printing Silicone Rubber for making transfer pad :
Pad printing silicone rubber for transfer pad is used for surface printing of plastic and hardware products. It has good resistance to wearing, no distortion, no leakage and good ink transfer property.
Charateristic of Pad Printing Silicone Rubber for making transfer pad :
Pad printing silicone rubber for transfer pad is a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing.
Product Data of Pad Printing Silicone Rubber for making transfer pad :
Model | Appearance | Viscosity (cps) | Hardness (Ao) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elongation (%) | Mixing Ratio(%) | Pot life (H) | Demould time(H) |
916 | red / yellow | ≤35000 | 15±2 | ≥3.5 | ≥24 | ≥420 | 2~3 | 0.5 | 2~4 |
How to Use Pad Printing Silicone Rubber for making transfer pad :
1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel before use.
2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing.
Storage, Transportation and Notes:
1.The products should be deposited in a clean, ventilating and shade place.
2. The products are non-dangerous goods.
3. Avoid skin and eyes contacting with the curing agent in processing.
4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
Certification of Pad printing silicone rubber for transfer pad:
Package of Pad printing silicone rubber for transfer pad :
