Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $11.80200 - 40,000 kilogram
US $9.8840,001 - 999,999 kilogram
Paramtents
component A white
component B red
Curing Agent 5%for free charged
Certification SGS,MSDS,RoHS
Material Material
Classification Chemical Auxiliary Agent
Appearance Fluid
Application making silicone pad
color any
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Application of Pad Printing Silicone Rubber for making transfer pad :
Pad printing silicone rubber for transfer pad is used for surface printing of plastic and hardware products. It has good resistance to wearing, no distortion, no leakage and good ink transfer property.
Charateristic of Pad Printing Silicone Rubber for making transfer pad :
Pad printing silicone rubber for transfer padis a double-component silicone rubber, and can be vulcanized in room temperature. Solidify time depends on the mount of curing agent, the more the curing agent, the faster the curing.
Product Data of Pad Printing Silicone Rubber for making transfer pad :
Model | Appearance | Viscosity (cps) | Hardness (Ao) | Tensile Strength (Mpa) | Tear Strength (KN/m) | Elongation (%) | Mixing Ratio(%) | Pot life (H) | Demould time(H) |
916 | red / yellow | ≤35000 | 15±2 | ≥3.5 | ≥24 | ≥420 | 2~3 | 0.5 | 2~4 |
How to Use Pad Printing Silicone Rubber for making transfer pad :
1. Uniformly stir the printing silicone rubber for 5-10 minutes in the package barrel before use.
2. Clean the mold with detergent, and dry up the mold by a piece of cloth or an air gun and then coat the mold with a layer of release agent.
3. The normal proportion between the printing silicone and si-oil depends on the requirements of the customers. If pattern is too big, a soft silicon pad is needed and the amount of si-oil is increased. Contrarily, if a silicon pad with high hardness is needed, the silicone oil should be added less or not. The appropriate hardness of general pad printing silicone rubber is 15A°~-25 A°; if too much silicone oil is added, the silicon pad is so soft that the printing times is limited, thereby bringing about abrasion intolerance, solvent intolerance and ageing.
Storage, Transportation and Notes:
1.The products should be deposited in a clean, ventilating and shade place.
2. The products are non-dangerous goods.
3. Avoid skin and eyes contacting with the curing agent in processing.
4. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.
Need any help on silicone rubber, please feel free to contact Ms Kitty:
Tel:86-755-89948294
Mob:86-15989267535
E-mail: hysh(at)szrl(dot)net
Skype:kity-467707861
You can also send me E-mail by scanning 2-Dimensional Bar Code below:
Certification of Pad printing silicone rubber for transfer pad:
Package of Pad printing silicone rubber for transfer pad :
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.