Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.60100 - 40,000 kilogram
US $10.2040,001 - 999,999 kilogram
Paramtents
color red/yellow/white/green
Certification RoHS.MSDS.SGS
Packging & Delivery
Min Order100 kilogram
Briefing
Detailed
RTV liquid silicone rubber for pad printing Features:
RTV liquid silicone rubber for pad printing with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
RTV liquid silicone rubber for pad printing Operation Instructions:
RTV liquid silicone rubber for pad printing is two-component silicone, part A is liquid silicon rubber, part B is catalyst. The usual mixture of silicone rubber and catalyst is 100 to 2 or 100 to 3.we take 100g of liquid silicon rubber and 2g-3g catalyst, mix them and pour it to your mold. After 2 to 4 hours, you will get a Pad printing silicone rubber.
datesheet RTV liquid silicone for pad printing
Model
| 901# |
Appearance
| Red white Yellow green |
Mixing proportion Of curing agent | 2-3% |
Operating time (hours) | 0.5 |
Curing time (hours) | 3-4 |
Hardness (A°) | 20-23 |
Viscosity (cs) | 29000-34000 |
Tensile-strength ( kgf /cm) | ≥33 |
Tear-strength ( kgf /cm) | ≥19 |
Elongation-break ( % ) | ≥390 |
Retractility (%) | ≤0.3 |
Usage
| Pad printing only |
.
Frequently asked question of RTV liquid silicone rubber for pad printing:
Why the silicon pad did not absorb the ink?
Any silicon pad or liquid silicon rubber could absorb ink well. If large patterns or big letters need to print, the printing pad will for sure absorb ink well. For small letters, please do not use hard silicon pad, as it could not absorb the printing ink thoroughly from the steel plate.
Why the silicon pad can not transfer the printing pattern well?
It is normal phenomena that every two out of ten products have this problem if the plastic toys are not spray painted. As in the production process, mold release agent will be sprayed onto the surface of the steel plate for eevery dozen products, and there will be some mold release agent left on the surface of the first one or two product. Please use Tianna water or face-clean water to clean the products before used for pad printing.
.
For get further information about our RTV liquid silicone product, PLS contact with Miss Rose
TEL: 0086-75589948294
Mobile:86-18938867525
FAX: 086-755-89948030
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.