Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $12.55200 - 40,000 kilogram
US $9.9840,001 - 999,999 kilogram
Paramtents
Sample Free
Certification: SGS,MSDS,RoHS
Hardness: 25-40 shore A
Mixing Ratio: 2-3%
Shelf life 12 month
Operating time (hour 25 0C ) 0.5
Elongation-break(%) 180-450
EINECS No: 39100000
Curing time(hour) 3-5
Curing agent: 3%for free charged
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Platinum cure silicone for tyre mold making
1.Description of Platinum cure silicone for tyre mold making
Platinum cure silicone for tyre mold making is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making tyre molds application.
2.Features of Platinum cure silicone for tyre mold making
* low shrinkage (less than 0.1% )
*high tensile and tear strength with high copy times
*easy for operation (mixing ratio at 1:1)
*good fluidity easy for pouring operation ( in round 10000 cps )
3.Datasheet of Platinum cure silicone for tyre mold making
Product | E-620 |
Appearance | Translucent |
Hardness(shore A) | 20±2 |
Mix ratio(A:B) | 1:1 |
Viscocity(mPa.s) | 10000±2000 |
Tensile strength (kgf/cm2) | 50±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | ≤0.1 |
4.Notice of Platinum cure silicone for tyre mold making
As our Platinum cure silicone for tyre mold making is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won’t be cured:
1 .Sulphur, sulfide and sulfur rubber materials.
2. Amine compounds as well as contains the amine materials.
3 .Pewter solder flux.
5.Package of Platinum cure silicone for tyre mold making
6.Certifications of Platinum cure silicone for tyre mold making
Need the price or other information for reference,please feel free to confirm with us some question at first
1) How about the size of your products?
2) Will you make the silicone mold by pouring way or brushing way ?
3) What's the raw material of your products ? Plaster? resin or other?
Then we will according it to recommend the most suitable silicone with the best price for your reference
Any questions, please feel free to contact Mr Lucas:
TEL: 086-755-89212369
FAX: 086-755-89948030
MOBILE:086-18898736056
E-mail: hysj(at)szrl(dot)net
You can also sned me E-mail by scanning QR code below:
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.