Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $10.69200 - 2,000 kilogram
Paramtents
Application electronic potting compound silicone rubber
appearance liquid silicone
hs code 39100000
color translucent
port shenzhen
sample free
technical support
quality good
hardness 30
viscosity 20000
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Typical Application of Electronic Potting Compound Silicone Rubber:
Electronic Potting Compound Silicone Rubber is suitable for bonded seal of electronic components, power module and control module, which requires waterproof and insulation. It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.
Description of Electronic Potting Compound Silicone Rubber:
Electronic Potting Compound Silicone Rubber is a newly insulating material silicon of silicon compounds.
It cures without heat, corrosion and just with little shrinkage. It can be applied to the sealing and pouring of various electronic components, and then forming insulation system.
Features of Electronic Potting Compound Silicone Rubber:
1.Room temperature vulcanize, and easy to operate;
2.Maintain flexibility at a wide temperature range, and excellent insulation performance;
3.Waterproofing, moisture-proof, mouldproof, dustproof, and fixed components;
4.Resistance to Chemical dielectric, anti-yellowing, resistance to climate ageing.
Picture show of Electronic Potting Compound Silicone Rubber:
Technical Parameters of Electronic Potting Compound Silicone Rubber:
Before Curing | Appearence | Black/Transparent Fluid |
Density(25°C g/ml) | 0.98±0.02 | |
Viscosisty(25°Ccps) | Part A 500±100:Part B:800±100 | |
Mixing Ratio | A:B=1:1(By weight) | |
Operating Time(25°C hr) | 5 | |
Curing time(80°C hr) | 0.5 | |
After Curing | Hardness(Shore A) | 0-40 |
Dielectric Strength(KV/mm) | 23 | |
Volume Resistance(Ω.Cm) | 1.0×10 15 | |
Permittivity(1.2MHz) | 3.0 | |
Temperature Resistence(°C) | -60~200 | |
Fire Resistance | UL94-V1 |
Operation way of Electronic Potting Compound Silicone Rubber:
1.Put part A and part B in separate container with equal dosage and stir evenly when mixing the two parts together.
2. Put the mixture into the vacuum machine under 0.08 MPa for 5 minutes.
3. The temperature influences the curing time of electronic potting silicone rubber. When in too low temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization.
Package of Electronic Potting Compound Silicone Rubber:
20Kg/pail (Part A10Kg + Part B10Kg)
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Website: www(at)szrl(dot)net
ADD: Liulian Shibi industrial, Pingdi town, Longgang district, Shenzhen, China
More information needed,Please feel free to contact Miss.Raemon:
E-mail: raemon(at)szrl.net
Tel: 18948315840
Skype: wendy.wen121
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.