Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $6.59200 - 2,000 kilogram
Paramtents
Appliation silicone rubber for sex toy making
appearance liquid silicone rubber
color translucent
hs code 39100000
ship by sea
port shenzhen
quality good
viscosity 20000
density 1.08
sample free
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Description of sexy dolls silicone rubber
E-635 food grade silicone rubber is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability. The
mixing ratio is 1:1,mainly be suitable for making molds application.
Applications of sexy dolls silicone rubber
E-635 food grade silicone rubber could be mainly used for food mold , such as chocolate mold , cake mold , it is also used for making concrete stones, wax molds, PU molds, resin molds, gypsum casting, candle molding .
Advantage of sexy dolls silicone rubber
-low shrinkage (less than 0.1% )
-high tensile and tear strength with high copy times
-easy for operation (mixing ratio at 1:1 /10:1)
-good fluidity easy for pouring operation ( in round 10000 cps )
-it is food grade with FDA
Datasheet of sexy dolls silicone rubber
Product | E-635 |
Appearance | Translucent |
Hardness(shore A) | 35±2 |
Mix ratio(A:B) | 1:1 |
Viscocity (mPa.s) | 12000±2000 |
Tensile strength (kgf/cm2) | 50±5 |
Tear-strength (kN/m) | 18±2 |
Elongation(%) | 450±50 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 110-20mins(60°C) |
Shrinkage rate (%) | ≤0.1% |
Operation instruction of E-635 platinum cure silicone rubber :
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(detergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .
SHENZHEN HONG YE JIE TECHNOLOGY CO., LTD
Website: www(at)szrl(dot)net
ADD: Liulian Shibi industrial, Pingdi town, Longgang district, Shenzhen, China
More information needed,Please feel free to contact Miss.Raemon:
E-mail: raemon(at)szrl.net
Tel: 18948315840
Skype: wendy.wen121
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.