liquid silicone rubber for statues

FOB Price

US $6.89200 - 40,000 kilogram

US $5.8940,001 - 999,999 kilogram

group name: RTV-2 silicone rubber for molds making

Min Order: 200 kilogram

brand name: Hong Ye silicone rubber

model: liquid silicone rubber

Nearest port for product export: Shenzhen, Guangzhou, Xiamen, Shanghai

Delivery clauses under the trade mode: FOB, CFR, CIF

Acceptable payment methods: T/T, L/C, Westem Union

Export mode: Export through agents

update time: Wed, 30 Mar 2016 15:02:07 GMT

contact supplier

Paramtents

Hardness(shore A) 25±2
MOQ 200kg
Tensile strength (kgf/cm2) 50±5
Viscocity Part B(mPa.s) 23000±2000
Color Any color
Viscocity Part A(mPa.s) 23000±2000
Pot life/working time (mins) 30-40
Features liquid
Shrinkage rate (%) 0.1
Mix ratio(A:B) 1:1/10:1

Packging & Delivery

Min Order200 kilogram

Briefing

silicone mold making rubber is for resin sculpture.
Feature:
Low shrinkage
Favorable tension
No deformation

Detailed

liquid silicone rubber addition cured plaster molds for statues

Description of liquid silicone rubber addition cured plaster molds for statues

HY- E series addition molding silicone is generally named two-components silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications of liquid silicone rubber addition cured plaster molds for statues

HY- E series addition molding silicone could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making, prototyping etc.

Characteristics of liquid silicone rubber addition cured plaster molds for statues

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

Technical Parameters of liquid silicone rubber addition cured plaster molds for statues

Model	E-625#
Appearance	Translucent
Mixing Ratio	1:1 or 10:1
Viscosity part A (Mpa.s)	20000±2000
Viscosity part B (Mpa.s)	3500±1000
Viscosity mixed(Mpa.s)	8000 ±2000
Operating time ( Mins 25C)	20-40mins
Curing time ( Hrs 25C)	2~5hrs
Hardness (A°)	25±2
Tensile-strength(kgf /cm2 )	60±5
Tear-strength (Kgf/cm )	12±2
Elongation-break(%)	300±20
Retractility(%)	≤0.1

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)

OPERRATING INSTRUCTION for liquid silicone rubber addition cured plaster molds for statues:

1.Stir part A and part B with right mixing ratio evenly. (E630# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).2.Enclose the product (the original model) with four plastic plates or wooden plates.

3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.

4.Pour the mixture with correct mixing ratio into the model frame. After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .

SHELF LIFE of liquid silicone rubber addition cured plaster molds for statues:

Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.

PACKAGE for liquid silicone rubber addition cured plaster molds for statues:

Packed in clean 25kg/pail, 200kg/pail.