Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $6.89200 - 1,000 kilogram
Paramtents
color red/white/green/yellow
Certifications ROHS.MSDS.SGS
application mold making
samples free of charge
port shenzhen
mix ratio 1:1
operating time 3-40mins
curing time 4-5H
hardness 30 shore A
delivery 5 days
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
APPLICATIONS of artificial stone molds silicone rtv2 rubber:
artificial stone molds silicone rtv2 rubber could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
FEATURES of artificial stone molds silicone rtv2 rubber
Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
Datasheets of artificial stone molds silicone rtv2 rubber
Model | E-625# | |
Appearance | Yellowish Transparent | |
Mixing Ratio | 1:1 | |
Viscosity part A (Mpa.s) | 20000±2000 | |
Viscosity part B (Mpa.s) | 3500±1000 | |
Viscosity mixed(Mpa.s) | 8000 ±2000 | |
Operating time ( Mins 25C) | 20-40mins | |
Curing time ( Hrs 25C) | 2~5hrs | |
Hardness (A°) | 25±2 | |
Tensile-strength(kgf /cm2 ) | 60±5 | |
Tear-strength (Kgf/cm ) | 12±2 | |
Elongation-break(%) | 300±20 | |
Retractility(%) | ≤0.1 |
DESCRIPTION of artificial stone molds silicone rtv2 rubber
artificial stone molds silicone rtv2 rubber is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
OPERRATING INSTRUCTION of artificial stone molds silicone rtv2 rubber
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE of artificial stone molds silicone rtv2 rubber:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of artificial stone molds silicone rtv2 rubber
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.