Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $6.69200 - 1,000 kilogram
Paramtents
application molding silicone rubber
appearance liquid silicone
port shenzhen
ship by sea
color white
sample free
technical support
quality good
hardness 40
originn China
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
APPLICATIONS of platinum cured liquid silicone molds for pouring concrete:
platinum cured liquid silicone molds for pouring concrete could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Datasheets of platinum cured liquid silicone molds for pouring concrete
Model | E642 A/B |
Mixing proportion | 1:1 or 10:1 |
Hardness (A°) | 40±2 |
Density ( g/cm 3 ) | 1.10 |
Pot life (under room temperature 23°C) | 30 mins |
De-mold time (hour) | 4~6 |
Viscosity (23 C°,mPa.s) | 6000±2000 |
Color | Translucent |
Tear-strength (kgf/cm) | ≥15 |
Tensile strength(kgf/cm2) | ≥60 |
Elongation-break(%) | ≥ 290 |
Linear shrinkage (%) | <0.1 |
FEATURES of platinum cured liquid silicone molds for pouring concrete:
Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
OPERRATING INSTRUCTION of platinum cured liquid silicone molds for pouring concrete:
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
SHELF LIFE of platinum cured liquid silicone molds for pouring concrete:
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of platinum cured liquid silicone molds for pouring concrete:
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.