Search This Supplers Products:Mold making Silicone rubberSilicone RubberLiquid Silicone rubberMolding Silicone RubberSilicone OilPad Silicone rubber
US $6.69200 - 2,000 kilogram
Paramtents
Application addition cure silicone rubber for sculpture
Appearance liquid silicone rubber
Color translucent
HS code 39100000
Ship by sea
sample free
hardness 25 shore A
mixing ratio 100:3
operating time 30-40mins
demoulding times 4-5H
Packging & Delivery
Min Order200 kilogram
Briefing
Detailed
Brief introduction of density liquid silicon for ornament molds
density liquid silicon for ornament molds is mainly used for metallic art and crafts,babynipple,cake, candy food grade products mold making and so on. It is nontoxic and with very low shrinkage.
Applications of density liquid silicon for ornament molds:
density liquid silicon for ornament molds is a kind of food grade slicone rubber.It is primarily intended for
cake mold, candy mold, chocolate mold and other food grade silicone mold, also intended for poly resin crafts, PU crafts,
PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied,
building decoration materials, largescale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on.
Features of density liquid silicon for ornament molds:
1. Two-component silicone rubber with platinum catalyst
2. Simple mixing ratio with 1:1 dosage
3. With high transparency, tensile strength, and tear strength.
4. Nontoxic & reach to Food grade
5. With good heat stability and weather ability ( temperature resistant range of -60-250 C)
6. With heat-ageing resistance
Picture show of density liquid silicon for ornament molds:
Datasheet of density liquid silicon for ornament molds:
Product | E-630 |
Appearance | Translucent |
Hardness(shore A) | 30±2 |
Mix ratio(A:B) | 1:1or 10:1 |
Viscocity Part A(mPa.s) | 20000±2000 |
Viscocity Part B(mPa.s) | 2400±500 |
Tensile strength (MPa) | 7.2 |
Tear-strength (kN/m) | 24 |
Elongation(%) | 440 |
Density | 1.13 |
Pot life/working time (mins) | 30-40 |
Curing time/setting time (hrs) | 3-4hrs(25°C) 20-30mins(60°C) |
Shrinkage rate (%) | 0.1 |
Storage of density liquid silicon for ornament molds:
RTV addition cure silicone rubber for gypsum sculpture is an environment friendly liquid silicone products, is not easy to burn and can be stored and transported as nonhazardous goods. The shelf life of the product is about 9 months from the date of production.
Inspection is required when exceeding the time limited. It can continue to be used in case of neither thickening nor deterioration.
Package of density liquid silicon for ornament molds:
5kg/drum, 20kg/drum and 200kg/drum
Shelf-life of density liquid silicon for ornament molds:
Twelve (12) months under room temperature 25 Celsius.
Certification of density liquid silicon for ornament molds:
ISO9001: HK05/01358
SGS:GZ0606100461/CHEM
RoHS:BTRS091718751
Patent:ZL200520001597.8
You can also send me e-mail by scanning 2 Dimensional Bar Code below:
About us:
We are manufacturer specializing in molding silicone rubber, mold duplicating rubber for resin craft makers, special silicon for manual molding, shoe mold rubber, pad printing silicone,
encapsulants and potting compound,addition cure liquid silicone,baby nipple silicone rubber ,lifecasting,food grade silicone rubber, trademark silicone rubber,
HTV silicone rubber, leadinc alloy crafts silicone rubber, hot stamping silicone plate, hot stamping silicone roller, gross rubber, RTV-2 silicone rubber, silicone molds, silicone products,etc
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.