food grade rtv2 silicone rubber

food grade rtv2 silicone for christmas decorated cupcakes

food grade rtv2 silicone for christmas decorated cupcakes description

food grade rtv2 silicone for christmas decorated cupcakes is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

food grade rtv2 silicone for christmas decorated cupcakes description

food grade rtv2 silicone for christmas decorated cupcakes is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability.

The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

food grade rtv2 silicone for christmas decorated cupcakes Applications

HY- E series Silicone Rubber For cake molds could be mainly used for making concrete

stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and

chocolate , candy and any other FDA food product mold making,prototyping etc.

HY-E620 Silicone Rubber is has been used for years to cake decoration molds .

food grade rtv2 silicone for christmas decorated cupcakes Characteristics

*low shrinkage (less than 0.1% )

*high tensile and tear strength with high copy times

*easy for operation (mixing ratio at 1:1 /10:1)

*very good flow and easy for pouring operation

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat

food grade rtv2 silicone for christmas decorated cupcakes Technical Parameters

Product	E-620
Appearance	Translucent
Hardness(shore A)	20±2
Mix ratio(A:B)	1:1/10:1
Viscocity Part A(mPa.s)	23000±2000
Viscocity Part B(mPa.s)	3500±500
Tensile strength (kgf/cm2)	45±5
Tear-strength  (kN/m)	20±2
Elongation(%)	500±50
Pot life/working time (mins)	30-40
Curing time/setting time (hrs)	3-4hrs(25°C) 110-20mins(60°C)
Shrinkage rate (%)	0.1

(Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

2.Weigh the two part correctly by electronic weight in two separate container .

3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .

4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

down the side of the mold frame so that less bubbles caused)

5. Enclose the product (the original model) with four plastic plates or wooden plates.

6. Clean your products and brush a layer of release agent(detergent or soap water) on

your product.

7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

food grade rtv2 silicone for christmas decorated cupcakes Notice:

As our Silicone Rubber For Chocolate molds , which is very easy to cause

cure inhibition , so pls do remember thoroughly clean the model and tool before

operation . Besides , pls avoid the liquid E-series silicone contact or mix with the

following material , otherwise the silicone won’t be cured :

1. Liquid condensation silicone ( condensation silicone not completely cured or organic

tin compounds )

2 .Sulphur, sulfide and sulfur rubber materials.

3. Amine compounds as well as contains the amine materials.

4 .Pewter solder flux.

food grade rtv2 silicone for christmas decorated cupcakes shelf life

8-10 months when stored under 24°C in original unopened packages.

Our products include 36 series in hundreds of kinds of silicone products like silicone rubber, RTV-2 molding silicone rubber, silicone rubber for manual model design, shoe sole mold silicone rubber, silicon oil, pad printing silicone rubber, encapsulant and potting compound, silicone rubber for LED display, electronic thermolysis ointment, thermal conductivity silicone, special silicone rubber for CPU, silicone tube, silicone membrane, silicone sealant, liquid silicone rubber, addition cure RTV silicone rubber, HTV silicone rubber, solid silicone rubber, gross rubber, silicone rubber sheet, hot stamping silicone plates, liquid silicone, hot stamping silicone roller, etc. Our silicone rubber is with good new raw material and various specifications, which is featured with good performance and high reputation.

Hong Ye Jie Technology Co., Ltd. established in 1998, is a Science and technology corporation which is engaged in production, R & D, and sales of silicone rubber. It sets up Hong Kong Hongye Ltd., Shenzhen Hongye silicone rubber Factory and other affiliated enterprises in 2005.

We have passed ISO9001:2008 Quality Management System. We have two main groups of people, they are: R & D team with is rich in theoretical knowledge and sales team, who is with experience, responsible and skillful workforce and young but promising, and proficient in several languages and with high level of business. With such a team, we promote our silicone rubber to Southeast Asia, Europe, the America and etc, and our silicone rubber is well-received by the customers from more than 50 countries and regions.

What you need is what we purse. We are sure that our first class silicone rubber will bring you first class products. We are looking forward to establishing long and good business relationship with you---our new/regular customers from domestic and foreign countries. Let's joint hands to cooperate with mutual benefits!

Any more details,welcome to contact Ms.Raemon for more information:

Name:Raemon Shi

Email:raemon(at)szrl.net

Tel:0086-18948315840

Skype:wendy.wen121

Wechat:18948315840

FaceBook: https://..........com/RaemonShi

Website:..........net

Company:ShenZhen HongYeJie Technology Co.,Ltd.